WARNING – Fire Hazard Keep the unit dry. Do not operate the unit in flammable or explosive environments. AVERTISSEMENT – Risque d’incendie Gardez l’appareil au sec. Ne pas utiliser l’appareil dans des environnements inflammables ou explosifs. Ioncell 5201128 Rev. D...
It provides powerful ionization through output tubes up to four feet in length. The single output tube also has the ability to be split, allowing the Ioncell to service multiple locations from a single ionization source. Options for Ioncell include: •...
Mounting holes for the ionizer are provided within the integral base of the unit. The in-line Ioncell is equipped for use with pressurized CDA only (clean dry air). Ioncell emitter points are general purpose Tungsten.
Report any damage directly to the carrier before attempting installation of unit. The Ioncell ionizer is designed for fixed position mounting onto a secure equipment frame or partition surface. The flanged base of the ionizer may be used as a template, or see Figure 2 for complete dimensional information.
Page 7
It includes two 1/4” tubing connectors, labeled “AIR INPUT” for the compressed air supply and “AIR OUTPUT” to be connected to the ionizer. The In-line Ioncell will switch power to the ionizer off when compressed air is not being fed to the assembly.
Page 8
Figure 2. Up to 6 (six) Ioncells can be attached to one power supply Ioncell 5201128 Rev. D...
5. MAINTENANCE The Ioncell ionizer is designed for calibration free operation with a minimum of maintenance and cleaning. There are no user serviceable parts within the ionizer. No attempt should be made to disassemble or repair defective products. Please contact Simco-Ion customer service for information concerning repair or replacement.
Standard Ioncell Ionizer Kit (no Power Supply), includes items 2, 3 below 4017140 In-line Ioncell Ionizer Kit with Power Supply, includes items 1, 3, 5 below 4015281 In-line Ioncell Ionizer Kit (no Power Supply), includes items 2, 3, 5 below...
The warranty does not apply when Simco-Ion parts and equipment have been energized by other than the appropriate Simco-Ion power supply or generator, or when a Simco-Ion power supply or generator has been used to energize other than Simco-Ion parts and equipment. Simco-Ion makes no warranty, expressed or implied, nor accepts any obligation, liabilities, or responsibility in connection with the use of this product other than the repair or replacement of parts stated herein.
Need help?
Do you have a question about the Ioncell and is the answer not in the manual?
Questions and answers