Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Cardinal 2XX-WIFI
Summary of Contents for Cardinal 2XX-WIFI
- Page 1 WiPort Option Card FOR 200 SERIES INDICATORS INSTALLATION MANUAL 8200-M520-O1 Rev A 203 E. Daugherty, Webb City, MO 64870 USA Printed in USA Ph: 417-673-4631 Fax: 417-673-2153 0107 www.cardinalscale.com Technical Support: Ph: 866-254-8261 • tech@cardet.com 8200-M520-O1 • 2XX-WIFI Page 1...
- Page 2 8200-M520-O1 • 2XX-WIFI Page 2...
-
Page 3: Fcc Compliance Statement
Persons engaging the procedures do so entirely at their own risk. SERIAL NUMBER _______________________________ DATE OF PURCHASE ___________________________ PURCHASED FROM ____________________________ ______________________________________________ ______________________________________________ RETAIN THIS INFORMATION FOR FUTURE USE 8200-M520-O1 • 2XX-WIFI Page 1... -
Page 4: Installation
8. To attach the ground wire, remove a 6-32 nut and washer from the corner of the controller board. 9. Connect the ground wire from the 2XX-WIFI board by placing the ring terminal over the 6- 32 threaded stud. 10. Reinstall the washer and 6-32 nut and tighten. - Page 5 4. Attach the right-angle end of the cable to the antenna jack on the 2XX-WIFI card. Re-Installing The Rear Panel After all terminations and connections have been made, remove the excess cable from the instrument enclosure and securely tighten each of the cable gland connectors.
-
Page 6: Indicator Setup
Setting up the 2XX-WIFI module on a 220 indicator: 1. Unplug the indicator. 2. Install the 2XX-WIFI module on the 220 main board. The antenna and extension cable and brackets do not matter at this point, just that the module is installed into the option card slot correctly and securely fastened to the 220 main board. - Page 7 INDICATOR SETUP, Cont. 14. At this point the 2XX-WIFI module can be setup. Refer to the information found in the 2XX-WIFI Module Setup section. 8200-M520-O1 • 2XX-WIFI Page 5...
- Page 8 2XX-WIFI MODULE SETUP Before operation may begin the 2XX-WIFI module must be setup. To facilitate control over Cardinal indicators on a wireless network, we have included instructions for the simplest setup or for more detailed instructions, refer to the WiPort User Guide” (WUG) pages 32 – 58 on the 2XX-WIFI DeviceInstaller Programs and Documentation CD (8200-M521-O1) for details.
-
Page 9: Status Leds
STATUS LED’S The 2XX-WIFI contains two LED’s to indicate the communication status of the WIFI connection. ETHERNET LINK (D3) - This LED will illuminate when the 2XX-WIFI has been successfully connected to a network and flicker when data is being transmitted or received over the wireless network. -
Page 10: Statement Of Limited Warranty
Cardinal Scale Manufacturing Company warrants that its equipment to be free from defects in material and workmanship as follows: Cardinal Scale warrants to the original purchaser only that it will repair or replace any part of equipment which is defective in material or workmanship for a period of one (1) year from date of shipment. - Page 11 Cardinal’s judgment is defective for a period of five (5) years from the date of original shipment. Excluded are any cosmetic...
- Page 12 8200-M520-O1 • 2XX-WIFI Page 10...
Need help?
Do you have a question about the 2XX-WIFI and is the answer not in the manual?
Questions and answers