Advertisement
ASSEMBLY INSTRUCTIONS
1. Gently remove contents from packaging and lay out in a clear area.
2. Assembling the projector and case:
a. Slide the buckles on both sides of the weather-resistant case, to open the cover. Place the projector
in the weather-resistant case and connect the USB fan. (See illustration 1)
b. Connect the adapter cable through the back of the weather-resistant case into the projector. (See illustration2)
c. Plug adapter into standard wall socket. (See illustration 3)
illustration 2
3. Focus
a. Turn the focus knob on top of the projector to adjust the focus. (See illustration 4)
b. Turn the keystone knob on top of the projector to achieve uniform projection. (See illustration 4)
c. Close the cover of the weather-resistant case and secure it by sliding the buckles back into place.
4. Set up:
a. Slide the outdoor stake into the track located on the bottom or side of the
weather-resistant case. (See illustration 5 for horizontal or vertical projection.)
b. Locate the outdoor stake, projector, and weather-resistant case. (Also included
is a tripod for indoor use when playing your own content. See illustration 6)
illustration 3
illustration 5
E-2
illustration1
keystone dial
focus dial
illustration 4
illustration 6
d
Advertisement
