Operation; Cleaning - Klarstein 10030534 Manual

Starting
1. Clean the refrigerator thoroughly. Wipe the outside with a soft dry cloth, the interior with a clean moist
cloth.
2. Insert the power supply cord into the socket.
Operating
When the refrigerator works with full power, the two LEDs on the circuit board will flash. The red one shows
the power input status. The green one shows the output status of the cooling system. Meanwhile the fan
inside the refrigerator begins to work. When the door is opened, the light under the temperature adjustor will
turn on automatically.
The temperature range for refrigerator is 10°C to 18°C. When the temperature is set on one certain point and
the temperature inside reaches this point, the automatic temperature control system begins to work and the
cooling system goes into linear temperature keeping status.
Note: Wait 3-5 minutes before restarting if you unplug the refrigerator. The unit may fail to operate
properly if restarted too quickly.
Cleaners: Never use harsh, abrasive cleaners, heavy-duty cleaners, or solvents on any surface.
Exterior: Wipe with damp, sudsy cloth, rinse and dry. For stubborn stains and for periodic waxing, use silicon
wax.
Refrigeration Section: Wash shelves and other removable parts in warm sudsy water, rinse and dry. Wash
interior with baking soda solution (3 tablespoons to I liter of water) or warm sudsy water, rinse and dry.
Magnetic Door Seals: Wash with warm sudsy water.
The Finishing Touch: Replace all parts and return thermostat dial to desired setting.

Operation

Cleaning

12