Speaker Set Up - Kenwood KVT-827DVD Instruction Manual

Speaker Set Up

You can select a speaker type and its size to get the
best sound effects.
1
Select a speaker you wish to adjust
(Page 54 8)
Speaker Set Up screen
MENU
1
2
3
4
1 Center speaker
2 Front speaker
3 Rear speaker
4 Subwoofer
5 Tweeter setup
You can set the tweeter when you are selecting
front speakers.
If you are using a tweeter together with the
front speakers, set the tweeter to "Use". In the
"Use" position, the Equalizer is adjusted to its
best position.
56
|
English
X'Over
2
10 cm
Front
3
5
Use
Tweeter
Speaker Speaker Speaker
2
Select a speaker type
You can select any of the following speaker types.
Center speaker:
NONE, 40mm x 70mm, 5cm, 10cm, 13cm,
16 cm over
Front speakers:
OEM, 10cm, 13cm, 16cm, 17cm, 18cm,
4x6 inches, 5x7 inches, 6x8 inches, 6x9 inches,
7x10 inches
Rear speakers:
NONE, OEM, 10cm, 13cm, 16cm, 17cm, 18cm,
4x6inches, 5x7inches, 6x8 inches,
6x9 inches, 7x10 inches
Subwoofer:
NONE, 16cm, 20cm, 25cm, 30cm, 38cm over
• Select "NONE" if you have no speakers.
• If you set the center speaker to "NONE" even in a short
time when you are setting the Surround Control (page
86) to "Bypass+Center", the Surround Control is set to
"Bypass" automatically.
• If you set the center and rear speakers to "NONE"
when you are setting the Surround Control (page 86)
to "Dolby PLII", the Surround Control is set to "Bypass"
automatically.
• If you set the rear speakers to "NONE" when you are
setting the Surround Control (page 86) to "SRS CS II", the
Surround Control is set to "Bypass" automatically.