Kenwood DPC-885 Instruction Manual

Playback from the first track
1
Connect headphones.
REMOTE
J
• Remove the rubber cap and connect the plug.
• Accepts the supplied headphones, or other optional head-
phones with a mini plug.
• The REMOTE terminal can be used only when the unit has
headphones with remote controller.
2
Open the top cover.
1 Pull the OPEN buckle lightly.
2 Open the top cover.
3
Place a disc.
Place with
labeled side up.
• Secure the disc by pushing a position near the center hole
until it clicks.
To pause playback temporarily
PLAY/PAUSE
D.A.S.C.
E
• When the 38key is pressed during playback, it pauses tempo-
rarily. Pressing the key again resumes playback.
L
H
J
I
4
Close the top cover.
1 Close the top cover.
2 Close the OPEN buckle.
• Press on the central portion of the OPEN buckle until it clicks.
5
Make sure the HOLD switch has been
released.
• Release the HOLD switch when performing an operation.
6
Start playback.
PLAY/PAUSE
• The power comes ON and playback begins.
7
Adjust the volume.
To decrease
volume
• When listening through headphones with remote controller, set
the volume of the main unit to around 40 and adjust with the
volume control of the remote controller.
To stop playback
0 1
0 0 5
Blinks.
• The total number of tracks and the total playing time of them
will be displayed.
DC-IN
_
+
A
B
I K
M
HOLD
K
D.A.S.C.
H
E L
D.A.S.C.
0 1
0
E
Track number Elapsed time
of the track
To increase
volume
D.A.S.C.
40
Volume display
I
STOP/OFF
D.A.S.C.
1 0
4 8
D
D.A.S.C. PGM SHUF B.BOOST 1 2 C
8 8
8 8 8 8
B.BOOST
885
P.MODE/SEARCH
REPEAT
STOP/OFF PLAY/PAUSE
C
E
D
The letter written on the hand in each illustration accompanying
the text indicates the position of the pressed key on the unit.
A B.BOOST (Bass Boost) key
Press to activate low-frequency compensation. This does not
operate with connection at the LINE OUT terminal.
B REPEAT key
Press for using various playback features.
C Skip (4, ¢) keys
Press either key to skip tracks.
D STOP/OFF (7) key
Press to stop the disc, turn power OFF or recharge the unit.
E PLAY/PAUSE (38) key
Press to play a disc, pause playback or switch power ON.
F
P.MODE/SEARCH (Play mode/Search) key
Press when using the program playback function or press together
with one of the Skip keys to initiate the fast forward or fast reverse
operation.
G D.A.S.C. (Digital Anti Shock Circuit) key
Press to switch the Digital Anti-Shock Circuit which prevents sound
from skipping.
H OPEN buckle
Use to open the top lid.
I VOLUME control
Turn to adjust the listening level. This does not operate with
connection at the LINE OUT terminal.
J REMOTE/ (Remote/headphones) jack
K HOLD switch
Use to turn the hold function on/off.
L DC IN (External DC power input jack) jack
L O M LINE OUT jack
0 5
Notes Notes
M Optical Output jack (OPT.OUT)
(For CHINA and Duty Free Shop in JAPAN)
How to connect the DPC-885 to a digital recording component
through the OPT. OUT jack.
1 Connect the DPC-885 to the household AC power supply through the
provided AC adaptor and play the DPC-885.
2 Set the D.A.S.C.to OFF.
3 Put the DPC-885 to pause mode.
4 Set the digital recording component ready for recording.
5 Start recording on the digital recording component.
6 Restart playback of the DPC-885.
To turn power OFF
After stopping playback, press the 7 key again.
2 3
Auto power-Off function
If no operation key has been pressed for 3 minutes while the
unit is in the stop mode, the power is turned OFF automati-
cally to prevent battery power consumption.
DPC-885 (En)
G
D.A.S.C.
F
C
STOP/OFF
D