Table of Contents
Advertisement
Quick Links
Package Contents
1. 3-in-1 Sensor
2. Mounting Hardware
3. Sensor Mounting Bracket
4. Instruction Manual
IMPORTANT
Register online to receive 1 year warranty protection
Questions?
(877) 221-1252 or visit www.AcuRite.com.
SAVE THIS MANUAL FOR FUTURE REFERENCE.
3-in-1 Weather Sensor
PRODUCT REGISTRATION
www.AcuRite.com
Contact Customer Support at
Instruction Manual
PRODUCT MUST BE REGISTERED
TO RECEIVE WARRANTY SERVICE
model 06008
Advertisement
Table of Contents
Related Manuals for ACU-RITE 06008
Summary of Contents for ACU-RITE 06008
- Page 1 Instruction Manual 3-in-1 Weather Sensor model 06008 Package Contents 1. 3-in-1 Sensor 2. Mounting Hardware 3. Sensor Mounting Bracket 4. Instruction Manual IMPORTANT PRODUCT MUST BE REGISTERED TO RECEIVE WARRANTY SERVICE PRODUCT REGISTRATION Register online to receive 1 year warranty protection www.AcuRite.com...
- Page 2 Features & Benefits 3-in-1 SENSOR 5. Mounting Hardware Includes anchors and screws. 1. Temperature & Humidity Sensors (internal) 4 Plastic Anchors 2. Release Lever for Battery Access 4 Long Screws 1 Set Screw 3. Mounting Point 6. Mounting Bracket 4. Wind Speed Anemometer 7.
- Page 3 SETUP 3-in-1 Sensor Setup Set the A-B-C Switch 1. Press the release lever and pull off the lower housing of the The A-B-C switch is located inside sensor. the battery compartment. It can 2. Remove the battery compartment be set to A, B or C. However, you cover.
- Page 4 Placement for Maximum Accuracy AcuRite sensors are sensitive to surrounding environmental conditions. Proper placement of the sensor is critical to the accuracy and performance of this product. 3-in-1 Sensor Placement The 3-in-1 sensor is designed to remain outdoors all year long. Choose an open location with no obstructions above or around the sensor for the most accurate measurements.
- Page 5 3-in-1 Sensor Installation Guidelines INSTALLATION HEIGHT Mount the sensor at a minimum height of 5 feet (1.5 meters) off the ground, in an open area. Higher is better for wind measurements - the National Weather Service recommends 33 feet high! MOUNTING OPTIONS The included mounting bracket is designed to screw directly onto wooden posts or surfaces that are 2”x 4”...
- Page 6 Care & Maintenance 3-in-1 Sensor Care Clean the Sensor Clean with a soft, damp cloth. Do not use caustic cleaners or abrasives. Insect Prevention Insects may cause obstructions and interrupt data by nesting in or on the 3-in-1 sensor. To limit this problem, spray sensor housing with a household insect repellent.
- Page 7 Customer Support AcuRite customer support is committed to providing you with best-in- class service. For assistance, please have the model number of this product available and contact us in any of the following ways: (877) 221-1252 AcuRite Visit us at www. .com Installation Videos Register your Product...
- Page 8 ©Chaney Instrument Co. All rights reserved. AcuRite is a registered trademark of the Chaney Instrument Co., Lake Geneva, WI 53147. All other trademarks and copy- rights are the property of their respective owners. AcuRite uses patented technology. Printed in China 06008 INST 062216 Visit www.AcuRite.com/patents for details.
Need help?
Do you have a question about the 06008 and is the answer not in the manual?
Questions and answers
Wind speed is not showing up on the monitor all other functions is working. I have a new replace 06008 from Amazon and it is doing the same as the other one I bought last week.
The wind speed may not be showing on the ACU-RITE 06008 monitor due to one or more of the following reasons:
1. Obstructions – The sensor may be mounted in a location with obstructions that block wind flow, preventing accurate measurement.
2. Installation Height – If the sensor is mounted too low (below 5 feet), wind measurements may be inaccurate or not detected.
3. Level Installation – The sensor may not be installed level, affecting wind speed readings.
4. Power Issues – The sensor requires 4 AA alkaline or lithium batteries. If the batteries are low or not installed correctly, the wind speed function may not work.
5. Wireless Range – The sensor must be within the 330 ft (100 m) wireless range; interference from home construction materials could impact data transmission.
6. Mechanical Blockage – The wind cups may be obstructed by debris or dirt, preventing them from spinning freely.
7. Interference – The sensor operates at 433 MHz; other electronic devices nearby could cause interference.
Checking these factors and ensuring proper installation can help restore wind speed readings.
This answer is automatically generated