Environmental Notice; Troubleshooting - Braun 8 Series User Manual

Environmental notice

Product contains batteries and / or recyclable electric waste. For environment
protection, do not dispose of in household waste, but for recycling take to
electric waste collection points provided in your country.
Subject to change without notice.
Trouble-Shooting
Problem:
Shaver
Shaver does not
start when pressing
the on / off button.
Charging does not
start when
connected to power
socket.
Shaver does not
charge completely
and keeps blinking.
Unpleasant smell
from the shaver
head.
Battery
performance
dropped
significantly.
Shaving
performance
dropped
significantly.
Possible reason:
Travel lock is activated.
1. Sometimes charging
starts delayed
(e.g. after long storage).
2. Ambient temperature is
out of valid range.
3. Power supply is not
plugged into the shaver
properly.
Ambient temperature is
out of valid range.
Shaver head is cleaned
with water.
1. Foil and cutter are worn
which requires more
power for each shave.
2. Shaver head is
regularly cleaned with
water but not
lubricated.
1. Foil and cutter are
worn.
2. Shaving system is
clogged.
Remedy:
Press the on / off button for
5 seconds to unlock the shaver.
1. Wait a few minutes. Charging will
start automatically.
2. Recommended ambient
temperature for charging is 5 °C
to 35 °C.
3. Power supply needs to snap in.
Recommended ambient
temperature for charging is 5 °C
to 35 °C.
When cleaning the shaver head with
water only use hot water and from
time to time some liquid soap
(without abrasive substances).
Remove Foil & Cutter cassette to let
it dry.
1. Renew Foil & Cutter cassette.
2. If the shaver is regularly cleaned
with water, apply a drop of light
machine oil on top of the foil
once a week for lubrication.
1. Renew Foil & Cutter cassette.
2. Soak the Foil & Cutter cassette
into hot water with a drop of dish
liquid.
Afterwards rinse it properly and
tap it out. Once dry apply a drop
of light machine oil on the foil.
27