Advertisement
Steps of Installment of the BSC Flow Section
Controller
1. Install the BSC control box on the sprayer.
(The box is IP protected and UV resistant, but it is suggested to place it in a place
where it is not reached by direct sunlight or rain).
2. Connect the controller section outputs to the valves.
2.a. Place rubber sealing in between the connection and the valve.
2.b. Fasten the connection on the valve with a screw.
3. Fasten the cables to the frame of the sprayer.
(The unfastened cables can break or develop contact issues over time, due to the
shaking of the machine during field work)
16
Advertisement
