Advertisement
●
BSC Pres module:
●
Can control 1-12 sections
●
Master valve control
●
2 and 3 way nozzle compatibility
●
Only has pressure sensor (does not have flow sensor)
●
Automatic application rate control for every hectare with the use of
the pressure sensor
●
Variable rate control capability
●
BSC Flow module:
●
Can control 1-12 sections
●
Master valve control
●
2 and 3 way nozzle compatibility
●
Has flow sensor, the pressure sensor is optional
●
Automatic application rate control for every hectare, with the use of
flow sensor
●
Variable rate control capability
All four module are optionally expandable with a switch, that can sense the machine's
raised or lowered status, primarily with mounted machinery like a liquid fertilizer
attached to a cultivator. The master valve is automatically turned on by the controller if,
with the help of the switch, it detects that the machinery at hand is lowered for work,
and it also automatically turns off the switch when the machinery is lifted up. The
MachineryGuide software automatically receives this information, thus when the
machine is raised and the tractor does maneuvers the software does not count the area
and the line-guidance is turned off.
Figure 11 Implement switch
9
Advertisement
