Related Manuals for Genius KYE Systems GG00A5
Summary of Contents for Genius KYE Systems GG00A5
- Page 2 English 4. A�er press bu�on on the remote control to enter the Bluetooth mode. If there is a paired device, it will return to the paired device. If there is no paired device, it will enter the pairing mode. 5. Pairing : In the Bluetooth status, long press bu�on on the remote control for 3 seconds.
- Page 3 English Turn off TWS Func�on: Long press key on the main speaker for more than 3 seconds. A�er a no�fica�on sound from the speaker, the blue and red LEDs on the secondary speaker flash alternately, indica�ng that the TWS func�on is disabled. 7.
- Page 4 English Status Function Button Operation Description The red LED is on when the USB power The red LED is on when you code of speaker is Turn off Turn on turn on, and enters LINE plugged in, and mode . enters LINE mode by default .
- Page 5 English Status Function Button Operation Description alternately, enters the pairing status. (If the TWS has been paired, please release the TWS func�on first, the reset func�on can work normally.) In the Bluetooth status, press and hold the Long press and hold keys for 3 seconds, there wi ll Bluetooth Reset...
-
Page 6: Fcc Statement
FCC STATEMENT 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference,and (2) This device must accept any interference received, including interference that may cause undesired operation.