Paper Installation - VTech DIGIART Squiggles & Sounds Manual

STENCILS & GEARS STORAGE
Stack the four stencils together with the frog stencil on the top, then
insert the stacked stencils into the frame. All of the gears can be stored
on the side of the Squiggles & Sounds board, as illustrated below.

Paper Installation

1. Unclip the frame from the back board, and insert a sheet of
A4 paper.
2. Clasp the frame to the back board to keep the paper secure.
3. Only use one piece of paper at a time.
Animal Stencil Installation
1. Locate the Animal Stencil Recognition Area.
2. When installing a stencil, be sure the bottom is firmly inserted into the
Animal Stencil Recognition Area and that the top is firmly inserted
into the teeth of the frame.
6
6