Tiger Tool 20150 Instructions Manual

Heavy Duty U-Joint
Service Kit
20150
Safety Warning
Read all instructions and safety warnings prior to operation. Failure to do so could result in
equipment damage, personal injury or even death.
CAUTION 10102: FAILURE TO CHECK THE SPHERICAL THRUST WASHER AND REPLACE AS NECESSARY MAY RESULT IN UNREPAIRABLE DAMAGE
TO YOUR U-JOINT PULLER GLOVE CASTING. PREVENTATIVE MAINTENANCE AS OUTLINED WILL ENSURE MANY YEARS OF USE FROM YOUR TIGER
TOOL PULLER. FAILURE TO PERFORM PREVENTATIVE MAINTENANCE WILL VOID YOUR WARRANTY.
CAUTION 10217: BEFORE ASSEMBLING BEARING CUPS ON ANY "SPICER LIFE SERIES" DRIVELINE, CLEAN OUTSIDE MACHINED SURFACES OF
YOKE TO BARE METAL—DO NOT GRIND!
Stay Alert! Watch what you are doing and use common sense when
•
operating this tool.
Inspect product for damage prior to using; do not use if product is
•
in unsafe condition.
Do not operate tool while under the influence of drugs, alcohol
•
or medication.
Always use safety equipment to prevent injuries. Approved face and
•
eye protection must always be worn by the operator, as well as others
in the work area.
View demonstration videos and a
complete product list at tigertool.com
Do not overreach Keep proper footing and balance at all times.
•
Dress properly. Do not wear loose clothing or jewelry.
•
Keep your hair, clothing and gloves away from moving parts.
Keep hands clear of all pressurized hydraulic components.
•
Always ensure hoses are free from sharp bends and kinks.
•
Keep your work area clean and well lit.
•
Have What It Takes
Technical Support
1.800.661.4661