Satco Blink Eco Series Operation Manual

Copyright © 2016
Satco Products, Inc.
All Rights Reserved.
Satco Products Inc.
National Toll-Free: Distribution Centers:
110 Heartland Blvd.,
800-43-SATCO New York, Florida,
Brentwood, NY 11717
(800-437-2826)
Texas, Washington, PH 631-243-2022
www.nuvolighting.com California, Puerto Rico FX 631-243-2027
Operation manual
LED Flush mount light
Blink Eco Series:S9880 S9881
With Integrated Dimmable Driver
Thank you for purchasing our product. This fixture has
been manufactured from components with advanced
optoelectronics to ensure high reliability and long life.
Before assembling please read this Operation Manual
carefully and save in a safe place for future reference.
Please note that all electrical connections must be in
accordance with local and National Electrical Code
standards as well as local building codes. In case you are
not familiar with proper wiring connections and building
codes, consult a qualified electrician.

Safety recommendations

1. RISK OF ELECTRIC SHOCK – THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE
WITH APPLICABLE INSTALLATION CODES BY A PERSON FAMILIAR WITH MENTIONED
ABOVE CODES AND HAZARDS INVOLVED. DISCONNECT POWER AT CIRCUIT BREAKER
OR FUSE BEFORE INSTALLING OR SERVICING.
2. Before use of the product carefully read the whole Operation Manual.
3. THE PRODUCT IS PURPOSED FOR INTERIOR USE ONLY, SUITABLE FOR
DAMP LOCATIONS.
4. Protect the product against direct contact with water.
5. Assemble the product only with the use of parts provided and the housing;
improper assembly may result in device failing which could damage the product,
personal property or cause injury.
6. Assembly shall follow with accessories delivered with the set only.
7. The device is not a toy, KEEP OUT OF REACH OF CHILDREN.
Specifcations:
Blink Eco Series:S9880 S9881
Operating Voltage:120VAC
Dimming: Triac
Power consumption: 12.5W/16.5W
Color Temp.: 2700K/3000K/4000K/5000K
Life span: 50,000h
Illumination authorization<5%
per 10,000h