Garmin eTrex Legend Basics

Hide thumbs Also See for eTrex Legend:

Use the PAGE button on the top

right of the receiver to switch

between the different screens.

Go in the direction the arrow is pointing to

move towards your waypoint or landmark.

NOTE: You must be moving in order for

The dark bars show the satellites

the GPS unit to determine where you are

you are "locked" on. You need at

and which way you are moving.

least 3 bars to use the receiver.

Table of Contents

Need help?

Do you have a question about the eTrex Legend and is the answer not in the manual?

Page 1 Use the PAGE button on the top right of the receiver to switch between the different screens. Go in the direction the arrow is pointing to move towards your waypoint or landmark. NOTE: You must be moving in order for The dark bars show the satellites the GPS unit to determine where you are you are “locked”...
Page 2 1 – Press and hold the THUMB STICK until the MARK WAYPOINT screen appears with the guy holding a flag. 2 – Your waypoint is automatically assigned a three-digit number. To change the name of the waypoint, use the THUMB STICK button to highlight its name.