Starting Disc Playback; Basic Playback Control - Toshiba SD-4100KU2 Owner's Manual

Playback from disc/Playback Feature
CD-RW (CD-Rewritable)
Audio/Video format or
MP3/JPEG files.
Audio CD (Compact Disc
Digital Audio)
Video CD
(Formats 1.0, 1.1, 2.0)
Super Video CD
MP3-Disc
is a trademark of DVD Format/Logo Licensing
Corporation.
Because of problems and errors that can occur
during the creation of DVD and CD software and/or
the manufacture of DVD and CD discs, Toshiba
cannot assure that this DVD player will successfully
play every disc bearing the DVD and CD logos. If you
happen to experience any difficulty playing a DVD
and/or CD disc on this DVD player, please contact
Toshiba Customer Service.
This DVD player requires discs/recordings to meet
certain technical standards in order to achieve
optimal playback quality. There are many different
types of recordable disc formats (including CD-R
containing MP3 files). Not all recordable discs will
operate or produce optimal playback quality. The
technical criteria set forth in this owner's manual are
meant only as a guide. Use of CD-RW for MP3 files
is not recommended.
You must obtain any required permission from
copyright owners to download or use copyrighted
content. Toshiba cannot and does not grant such
permission.
Supported Formats
MP3 tracks
-The file extensions has to be '.mp3 '.
-JPEG/ISO format.
-Maximum 15 characters display.
-Supported sampling frequencies & corresponding
bit-rates;
32kHz, 64-320 kbps
44.1kHz, 48kHz 80-320 kbps
JPEG/Pictures
-The file extensions has to be '.JPG ' and not
'.JPEG' .
-JPEG/ISO format.
-It can only display DCF-standard still pictures or
JPEG pictures such as TIFF.
Tips:
– Maximum 100 sessions for CD and 10 multi border
for DVD are supported.
– For DVD-R, DVD-RW multi border, only finalized
disc can be supported.
– For DVD+R and DVD+RW multi border both
finalized and unfinalized disc cannot be supported.
Helpful hint: Same discs cannot be player on this DVD player due to the configuration and characteristics
of the disc, or due to the condition of recording and authorizing software


Starting disc playback

A Turn on the TV and select the video input connected
to the DVD player.
Press 2ON / STANDBY to turn on the DVD player.
B
Press OPEN/CLOSE to open the disc tray.
C
Place a disc onto the disc tray with the label facing
D
up, then press OPEN/CLOSE.
For double-sided discs, load the side which you
want to play facing up.
Playback may start automatically. If not, press PLAY/
E
PAUSE .
If a disc menu appears on the TV, see page 14
'Using the disc menu'.
If the parental control was activated for the
inserted disc, you have to enter your four-digit
password, see page 20.
For more playback features, see pages 13 - 16.
Tips:
-Do not overturn the DVD player while disc loading,
playing or ejecting.
-Do not close the disc tray manually even if the
power is switched off.

Basic playback control

Unless otherwise stated, all operations described are
based on Remote Control use.
Pausing playback
During playback, press PLAY/PAUSE
A
playback and display a still picture.
Sound will be muted.
To resume normal playback, press PLAY/PAUSE
B
again.
Skipping chapter/track
 Press PREV / NEXT
or next chapter/track during playback.
When PREV is pressed after the first 5
seconds of playback, playback will start from the
beginning of the current chapter/track. If you press
the button within the first 5 seconds, playback will
start from the beginning of the preceding chapter/
track.
 Press DISPLAY to display the disc
information for title/chapter/track.
 Use Number buttons to enter valid chapter / track
number directly. For the track/chapter numbers which
are greater than ＂9＂, use ＂+10＂ button. Each
presses increases the number by 10. Then press the
second digit of track/Chapter number.
The playback skips to the selected chapter / track.
la
Stopping playback
ybac
During playback, press STOP
A
The DVD player memorises the stopped point.
to pause
to go to the previous
 .