Policy; Technical Details; Types - Invacare Ben 9 Plus Maintenance & Spare Parts Manual

Table of Contents

Advertisement

Policy

8
INVACARE Ltd. repair policy is as follows:
Repairs to ANY component other than those detailed in Chapter 2 are not covered. Repairs to ANY metal
work is not generally permitted without express permission of INVACARE Ltd. ALL fasteners i.e. bolts,
Nyloc nuts, and any fastener showing damage MUST be renewed.
Failure to comply with the above absolves INVACARE Ltd of liability.
!
Note:
Certain components will require removal to carry out maintenance. With the exception of fas-
teners, these components should be refitted.

Technical Details

9
The following data applies to the Ben 9 range of wheelchairs.
9.1
Available seat sizes:
15 inches by 16 inches, 17 inches by 17 inches and 18 inches by 17 inches and 16 inches by
16 inches.
9.2
Seat to ground height:
19 inches.
9.3
Wheel types available:
12 1/2 inches transit with pneumatic or solid tyre. Located to frame.
9.4
Maximum user weight:
20 stones (127kgs)
9.5
Backrest type:
Folding backrest.
9.6
Chair finish:
Powder coat in red or black.
9.7
Transit weight of chair:
29lbs (13.2kgs).

Types

Options
10
The chair is available in various user defined optional types. For further details refer to INVACARE Ltd for
details and acceptable combinations.
04/02
INTRODUCTION
Page 7

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents