Table of Contents
Advertisement
Activating/deactivating the acoustic locking
verification signal
Multimedia system:
Vehicle
î Vehicle Settings
4
5
Acoustic Lock
5
Activate O or deactivate ª the function.
#
Activating/deactivating the panic alarm
Requirements:
The ignition is switched off.
R
%
The panic alarm function is only available in
certain countries.
To activate: press button
1
for approx‐
#
imately one second.
A visual and audible alarm is triggered.
To deactivate: briefly press button
#
or
Press the start/stop button on the cockpit
#
(the SmartKey is inside the vehicle).
Changing the unlocking settings
Possible unlocking functions of the SmartKey:
Central unlocking
R
Unlocking the driver's door and fuel filler flap
R
To switch between settings: press the
#
Ü and ß buttons simultaneously for
approximately six seconds until the battery
check lamp flashes twice.
Options if the unlocking function for the driver's
door and fuel filler flap has been selected:
Pressing the Ü button a second time cen‐
R
trally unlocks the vehicle
Vehicles with KEYLESS-GO: if you touch
R
the inner surface of the door handle on the
driver's door, only the driver's door and fuel
filler flap are unlocked.
1
again.
Deactivating the SmartKey functions
If you do not use the vehicle or a SmartKey for
an extended period of time, you can reduce the
energy consumption of the respective SmartKey.
To do so, deactivate the SmartKey functions.
To deactivate: press the & button on the
#
SmartKey twice in quick succession.
The battery check lamp of the SmartKey
flashes twice briefly and lights up once.
To activate: press any button on the Smart‐
#
Key.
%
When the vehicle is started with the Smart‐
Key in the marked space of the center con‐
sole, the SmartKey functions are automati‐
cally activated (
/
55
Opening and closing
page 111).
Advertisement
Table of Contents
