Switching The Main And Pop Pictures; Freezing The Pop Picture; Adjusting The Size Of The Double-Window - Toshiba 32HFX73 Owner's Manual

Switching the main and POP pictures

Press SWAP while you are using the POP feature to switch the main
and POP pictures.

Freezing the POP picture

1. Press FREEZE while the POP is not on the screen.
The POP window will appear with a still picture.
2. Press FREEZE again to renew the still picture.
To erase the still POP window:
Press EXIT.

Adjusting the size of the double-window

When the input signals of the main and POP pictures are 480i, you
can adjust the size of each window. Repeatedly press x or • to change
the size (in 9 steps).
FAV
ENTER
FAV
CH
EXIT
DVD CLEAR
DVD RTN
CH RTN INPUT RECALL
SLOW/DIR SKIP/SEARCH
REW PLAY
PAUSE/STEP
AM/FM STOP
TV/
DISC
VCR
POP CH SPLIT POP DIRECT CH FREEZE
SWAP CH SCAN
Still picture
Note:
You can adjust the size of the double-window
for 480i signals only. If you try to adjust the
double-window size when viewing another
signal, the message "Not available" will
appear on the screen.
NOTICE OF POSSIBLE ADVERSE
EFFECTS ON TV PICTURE TUBE
Avoid displaying stationary images on
your TV screen for extended periods of
time. Fixed (non-moving) images (such
as still PIP/POP windows or black/gray
bars in wide-screen picture or PIP/POP
formats) can become permanently
engrained in the picture tube. This type
of damage is NOT COVERED BY
YOUR WARRANTY because it is the
result of misuse. See item 33 on page 4.
x •
VOL
EXIT
MUTE
FF
REC
FREEZE
SOURCE
SWAP
35