Jabra Elite 25e Manual

Hide thumbs Also See for Elite 25e:

How do I pair my Jabra Elite 25e with my mobile device?

Jabra Elite 25e

To pair your Jabra Elite 25e with your smartphone, tablet, or other mobile

device, follow these steps.

1. Turn on the Bluetooth setting on your mobile device.

2. Turn off your Jabra Elite 25e by pressing and holding (5 seconds) the

Multi-function button until the LED flashes red.

3. To enter pairing mode, press and hold (5 seconds) the Multi-function

button until the LED flashes blue (minimum of 4 flashes).

Pairing mode is announced in the earbuds and the LED continues to

flash blue.

4. To pair, go to the Bluetooth menu on your mobile device and select the

https://www.jabra.no/supportpages/jabra-elite-25e/100-98400000-60/faq/64b5b792-

4bc2-49b3-8aa6-729a1880ccf8

07/04/2021 12:55

Side 1 av 2

Table of Contents

Need help?

Do you have a question about the Elite 25e and is the answer not in the manual?

Page 1 1. Turn on the Bluetooth setting on your mobile device. 2. Turn off your Jabra Elite 25e by pressing and holding (5 seconds) the Multi-function button until the LED flashes red. 3. To enter pairing mode, press and hold (5 seconds) the Multi-function button until the LED flashes blue (minimum of 4 flashes).
Page 2 07/04/2021 12:55 Jabra Elite 25e from the list. Enter “0000” (four zeros) if you are asked for a pin code. Note If pairing is not successful, try the pairing steps again, or try pairing with a different Bluetooth device. For troubleshooting tips, here.