Related Manuals for Allo RemoteControl NICE HSCU1 Series
Summary of Contents for Allo RemoteControl NICE HSCU1 Series
- Page 1 INSTRUCTIONS NICE Models HSCU1 Visit our Website. www.alloremotecontrol.com Visit our website: www.Alloremotecontrol.com families:...
- Page 2 Installation INSTALLATION: 01. Remove the protection grille (fig. 7-A) and the cover (fig. 7-B) to open the housing; 02. Unhook the side hook so that the body of the control unit can be rotated (fig. 8); 03. Insert the memory board supplied; ensure that it is correctly inserted in the internal connector guides (fig.
- Page 3 Visit our website: www.Alloremotecontrol.com...
- Page 4 Visit our website: www.Alloremotecontrol.com...
- Page 5 Visit our website: www.Alloremotecontrol.com...
- Page 6 CONTROL PANEL PROGRAMMING: General rules for programming: • Modifications to settings must be confirmed by pressing the key OK; if not confirmed, the modification is not saved. • When the display shows the symbols this means that the user can scroll up through the list using key , or down through the list using key •...
- Page 7 Programming menus: PHONE BOOK MEMORY: This section enables memorisation of the names and telephone numbers of persons who will receive alarm messages and technical system information. The phone book can store up to 63 names (items). Position number 64 can be programmed exclusively with the number provided by the SIM card operator to display residual credit.
- Page 8 Vocal message recording procedure: 01. From the menu MESSAGES press OK to confirm: VOCAL MESSAGES is displayed. 02. Press OK again to confirm: VOCAL MESSAGE N°1 is displayed. 03. Select the required message using keys and press OK to confirm. The text OK TO RECORD is displayed.
Need help?
Do you have a question about the NICE HSCU1 Series and is the answer not in the manual?
Questions and answers