Assembling Your Machine - Dyson Pure Hot+Cool Cryptomic HP06 Getting Started

Assembling your machine

Use both hands to lift your machine
out of the box, by its base.
Do not lift out by the loop amplifier.
Clik
6
Clik
Push down the Shroud release
buttons on both sides of your
machine to release the shrouds.
Your machine comes with a
permanent Dyson Cryptomic™ filter
and a Combination filter.
Remove the Combination and
Dyson Cryptomic™ filters from any
protective packaging.
Push the Dyson Cryptomic™ filter
into position on the machine.
Push both the Combination filters
into the shrouds until the tabs on the
top and bottom click into place.
Put the shrouds into position on the
main body and push gently until
they click securely into place.
Place the remote control on top
of the machine with the buttons
facing down.
Plug in and switch on.