Download Print this page
GTStar TK210-4G Quicktour

GTStar TK210-4G Quicktour

Accurate tracking power standby

Advertisement

Quick Links

TK210-4G QUICK
TOUR
|
Accurate Tracking
Power standby
Please carefully read the user guide before use in order to quickly get the right
to operate. Product appearance, color and accessories are subject to change
without prior notice in this manual!
1,Functions and Product parameters
◆ Real-time tracking
◆ Vibration/Displacement/Low battery/Power off/over speed alert
◆ Main power cut off alert ◆ ACC detection ◆ Geo-fence
◆ History Route ◆ Cut and resume oil remotely
◆ AGPS locating

Advertisement

loading
Need help?

Need help?

Do you have a question about the TK210-4G and is the answer not in the manual?

Questions and answers

Summary of Contents for GTStar TK210-4G

  • Page 1 TK210-4G QUICK TOUR Accurate Tracking Power standby Please carefully read the user guide before use in order to quickly get the right to operate. Product appearance, color and accessories are subject to change without prior notice in this manual! 1,Functions and Product parameters ◆...
  • Page 2 2,Products list number products name count remark Device relay oil break line Connection line 150mm Power line 1.0m Operation manual 3,Spe. ①North America Version: LTE B2/B4/B12 etc;WCDMA :B2/B5 ②Euro Version: LTE-B1 B3 B5 B7 B8 B20 etc; Frequency WCDMA:B1 B2 B5 B8 ;GSM: 850/900/1800/1900MHZ ③South American version: LTE- B1 B3 B5 B8 etc;...
  • Page 3: Led Indicator Definition

    Device enabling and wiring. LED Indicator Definition Green Indicator:LTE Status of indicator Meaning Flash LTE conversation start Continuously in bright status No LTE signal Green Led off Power off or in sleep mode Blue Indicator:GPS Status of indicator Meaning Flash GPS location successful Continuously in bright status GPS signal searching...
  • Page 4 4.1.6 Schematic diagram of wiring principle Picture 2 Turn on the unit outdoors by Pushing the button to “ On” the indicator is on.(when the green light and blue light are both flashing , you can do setting command by step)
  • Page 5 a, Open the rubber plug, Insert a mini SIM card support WCDMA or LTE network into the slot and make sure the chip side is up. b, Connect power cable and relay follow picture 2 and picture 3. c, Set admin number,by sending a SMS command to the SIM card inside device.
  • Page 6 Cut and Cut oil resume oil Arm&Disar 000 or 111 or SF delay in Google Position G123456# or where restart Restart Back to format No reply factory Download phone APP Method: Scan above QR to download; Log in by website and phone APP Log in by Website: Open the website www.zg666gps.com, choose IMEI, enter the 10-digit bar code of the device, the default password is 123456, click “GO”...
  • Page 8 Faults & The solutions Q:Start up Fail? A:Check the cable connect right or not. Q:The device can not obtain location information? A:Place the unit at the open area to test. Q:How to choose SIM card? A: the SIM card must support GSM&GPRS,and ensure that the card has enough currency and credit.
  • Page 9 CMNET “ and send it to the SIM card of the device,CMNET is Chinese operator’s APN, Replace the corresponding APN when use in other countries, APN details, please consult your local SIM card carrier. Cautions Please comply with the instructions to extend the unit life: 1.
  • Page 10 Using other batteries and chargers will cause unwanted situation.