Rio Yes LAHC6 User Manual page 20

7. Place the wand onto the skin over the area you wish to treat ensuring the touch pins are in
© The Dezac Group Ltd 2014
© The Dezac Group Ltd 2014
© The Dezac Group Ltd 2014
9. Turn off and lock the unit with the security key. Unplug the unit, remove the key and store
contact with the skin. Yes Laser has a skin detect feature; when the wand is correctly positioned
a constant white skin detect/treatment light will illuminate at the front.
8. Press and HOLD the
The white treatment light will flash to indicate the laser treatment is in
progress, the selected treatment mode will flash and the unit will beep
repeatedly (this can be muted, see page 21). When the laser treatment is
complete, the white light will stopping flashing and the selected treatment
mode will stop flashing. You can now move onto the next area of hairs
to be treated. When moving the wand to the next area of hairs the
touch pins must be removed briefly from the skin.
Hint: It is important to maintain skin contact during treatment. You may need to adjust the
wand slightly to achieve good contact. Treatment may take up to 60 seconds to complete
depending on the treatment level and mode used.
separately. Store away from children.
Note: If no buttons are pressed after 20 minutes the unit will enter standby mode. To restart,
turn key off and on again.
HOW TO USE
treatment button
20
to start the laser treatment.