Mimic Configuration - ABB RET 54 Series Technical Reference Manual, General

1MRS755225
5.1.2.2.
Transformer Terminal
Technical Reference Manual, General
Fig. 5.1.2.1.-1 Example of a transformer terminal configuration with the Relay
Configuration Tool

MIMIC configuration

The control functions configured using the Relay Configuration Tool can be
associated with position indicators that are part of the MIMIC configuration picture
displayed on the graphic LCD of the HMI. The MIMIC configuration picture is
designed with the Relay Mimic Editor. In addition, the editor is used to define the
eight programmable LED indicators and the corresponding alarm texts on the front
panel, the alarm modes, and the interlocking LED texts.
The MIMIC picture may include a single-line diagram, measured values with units,
free texts, etc. The position indicators (open, closed, undefined) are drawn according
to the customer's requirements. Note that the operation of the objects themselves is
determined by means of the Relay Configuration Tool.
RET 54_
iec_conf_RET
31