Before you Start Please read these instructions fully before starting. Although these instructions are comprehensive we always recommend that a technically competent installer undertake the installation. Unpack and check that the shower tray is the colour, size, shape and type you require. Check for any damage.
Installation – Solid Floor Access area Place the shower tray in position on the floor Form a trench in the floor to hold the waste unit (ensuring surface is level) and mark the and piping. perimeter and waste hole on the floor includ- Before proceeding, dry fit all items in-situ to ing an area outside the perimeter for access ensure compatibility.
Page 5
Installation – Solid Floor Mix fine sand, cement and a cement additive Place the shower tray onto the wet cement in accordance with the manufacturers ensuring that it is fully supported. Check the instructions to a workable mix to cover the level of the top rims only as the shower tray has total area under the tray.
Troubleshooting The shower tray will not fit the space available. Consider recessing the edge of the tray into adjoining walls or using a smaller shower tray and enclosure. There is water retaining on the surfaces of the tray. Check that the shower tray is level (top rims) as it is normal for small amounts of localized water to be retained on new shower trays.
Need help?
Do you have a question about the SE951 and is the answer not in the manual?
Questions and answers