Pool entry system. adjusts to fit 48” to 54” pools and decks. single unit, two units with gate (6 pages)
Summary of Contents for Confer Plastics PES-DBL-X
Page 1
Can be used on Pool Entry System, SIG-X System and STEP Enclosure Kit ASSEMBLY AND INSTALLATION MANUAL NEW!! Now with Automatic Gate Closer! MODEL MODEL SES-X PES-DBL-X WARNING: GATE MUST BE PADLOCKED WHEN NOT IN USE. Made in the U.S.A. by www.conferladders.com...
Page 2
POOL ENTRY SYSTEM GATE ASSEMBLY MODEL # PES-G-X BILL OF MATERIALS #10 x 1-1/4” #7 x 1/2” Parts List Required Part # Self-tapping Self-tapping Gate 6-Gate-01 Screw Screw Hinge Mounting Post 6-Gate-02 Latch Mounting Post 6-Gate-03 Tools Required Hardware Pack Required Part # Cordless Drill...
Page 3
Step #1 Step #2 Step #3 Spread open the flange of the hinge With a cordless drill, fasten the hinge Slide the open gate hinge through the mounting post and slide it down over post to the side panel using six of the hinge post pin opening and wrap the the right side panel until the bottom #10 x 1-1/4”...
Page 4
The Confer-Step can be covered, if desired, and stored outdoors. CONFER PLASTICS INC. FIVE YEAR WARRANTY Confer Plastics Inc. warrants their swimming pool ladders and steps to be free from defects in workmanship for five years from date of purchase.