Toshiba U202-BK User Manual page 23

Charging the Built-in Battery/Connecting to a computer
The gigabeat
"charging icon" will appear on the gigabeat
charging is completed, the charging icon is green.
(Sample Illustration) Charging icon, charge complete, and not
charging icons
It takes approximately 2 hours to fully charge the gigabeat
NOTE
❖
❖
❖
❖
❖
(Sample Illustration) Battery level display on the gigabeat
while discharging
NOTE
The gigabeat
large amounts of data are stored on the gigabeat
®
will display: "USB Connected" and the
®
The gigabeat is automatically connected by Media Transfer
Protocol. The first time you establish the Media Transfer
Protocol connection, a screen appears in which you select the
operation performed when the gigabeat
computer. Unless you are immediately transferring music,
click Cancel.
Charging through the USB connection is dependent on the
performance of the computer's USB bus power supply
function. For this reason, some computers may not be able to
charge the gigabeat
with a computer that does not support charging, the
connection may drop out quickly so that the computer's USB
functions are temporarily unavailable. If this happens,
disconnect the gigabeat
Charging times vary depending on factors such as the status
of the internal battery and the ambient temperature.
The internal battery should be charged within the temperature
range for normal use (5°C to 35°C/ 41°F to 95°F). If the
temperature is outside this range, the gigabeat
charged properly.
As the remaining battery power drops, the battery level display
®
on the gigabeat screen changes as shown below. Recharge
®
the gigabeat when the remaining battery power becomes low.
®
may take some time to connect to the computer if
Getting Started
®
. When you establish a USB connection
®
and restart the computer.
Remaining battery power
®
screen.When
®
.
®
is connected to the
®
may not be
®
screen
®
.
23