Replacement Of Koru Digital Timer - Blomberg BWOS 24102 SS Service Manual

Replacement of Koru digital timer

Koru Electronic Controller
1. Koru main board
2. Koru display board
3.Encoder
4.Display encoder connector group
5.Display and mainboard connector group
Saatin panodan sökülmesi
Unscrew the top wall before accessing the controller.
Right screw
Electronic controller holder is fixed to front panel with
two screws which are located left and right side of
controller.Unscrew the then take out the card holder.
BARBAROS BUILT IN OVEN
left screw
Replacement of Koru digital timer
Display Encoder Kablosunun Degistirlmesi
2 encoder are connected with two connector to
display board connectors are left and right side of
the display board.
Take out connectors arrow ways.
Changing the Connector
Connectors are 7 ways and 8 ways.
Remove connector by pulling according to arrow.
Page 24