Replacement Of The Oven Thermostat; Replacement Of Cooling Sheet Group; Replacement Of Cooling Motor - Blomberg BWOS 24102 SS Service Manual

Replacement of the oven thermostat

First remove the thermostat knob and disassamble the
control panel.Unbend the panel pin and demount the
thermostat plastic pin from the control panel.Turn
comutator plastic clockwise direction to remove the
group from the panel.

Replacement of cooling motor

To reach the cooling motor upper cover sheet should
be demounted.Cooling up for is placed on the upper
wall of oven cavity.Turn the cooling motor and support
sheet group clock wise direction to demount.
BARBAROS BUILT IN OVEN

Replacement of cooling sheet group

First replace the upper cover sheet.
Unscrew 2 screws which hold the ventilation sheet
metal,are placed the cavity inner ceiling.
Ventilation sheet metal could be removed by pulling
it as shown in the figure.
Page 15