Table of Contents
Advertisement
Component
Power light
Indicator light
Powered USB 2.0
ports
(USB Sleep and
Charge ports)
Microphone jack
Headphone jack
Introduction
Quick Tour
Description
Glows blue when power is being supplied from the
AC adaptor.
Indicates the status of docking, undocking, and
charging functions as follows:
Flashing green: Docking is in process.
Solid green: Computer is docked.
Flashing orange: Undocking is in process.
Solid orange: Computer is undocked or
disconnected and the dynadock™'s USB Sleep and
Charge ports are charging any connected,
chargeable devices.
Off: Computer is undocked or disconnected.
dynadock™ USB Sleep and Charge ports are off.
Connection points for USB 2.0 or 1.1 devices.
When the dynadock™ is powered on, these ports
charge connected battery-powered USB devices
(such as PDAs, MP3 players, and cellular phones)
even when the dynadock™ is disconnected from
your computer or your computer is off. For more
information, please see
page
56.
Note 1: Some USB devices may not support this
feature.
Note 2: Certain USB devices, such as optical disk
drives and hard disk drives, have high power
requirements. Due to the power output limitations
of the USB ports, you may not be able to operate
more than one such device at a time.
Note 3: If your USB device came with an AC
adaptor, be sure to connect the device to a power
outlet with the AC adaptor.
A standard 3.5 mm mini jack for mono audio input
from a microphone.
A standard 3.5 mm mini jack for stereo audio
output to headphones/headsets/speakers.
"Charging USB devices" on
15
Advertisement
Table of Contents
