Remote Control; Battery Installation; Functions Of The Remote Control Buttons - Kenwood DNR1007XR Instruction Manual

Remote control

Remote control
This unit can be operated using the remote
control KNA-RCDV331 (optional accessory).
# CAUTION
• Risk of fire or explosion if the battery is
replaced by an incorrect type. Ensure to
replace only with the same type.
• Risk of fire, explosion or the leakage of
flammable liquid or gas if the battery is left in
an extremely high temperature surrounding
environment and/or subjected extremely
low air pressure. The battery pack or batteries
shall not be exposed to excessive heat such as
sunshine, fire or the like.
• Risk of fire, explosion or the leakage of
flammable liquid or gas if the battery is
disposed into fire or a hot oven, recharged,
shorted, mechanically crushed or cut of the
battery.
• If spilled fluid comes in contact with your eyes
or on clothing, immediately rinse with water
and consult a physician.

Battery Installation

If the remote control operates only over
shorter distances or does not operate at all, it
is possible that the batteries are depleted.
In such instances, replace the both batteries
with new ones.
1
Insert two "AAA"/"R03"-size batteries
with the and
following the illustration inside the case.
86
poles aligned properly,
Functions of the Remote
control Buttons
Ñ
Switch the operation mode
The functions operated from the remote
control differ depending on the position of the
mode switch.
AUD mode
■
Switch to this mode when controlling a
selected source or tuner source, etc.
DVD mode
■
Not used.
TV mode
■
Not used.
NAV mode
■
Switch to this mode when controlling
navigation function.
NOTE
• When controlling a player that is not integrated in
the unit, select "AUD" mode.
AUD
•
DVD
•
•
T V
•
NAV