Table of Contents
Advertisement
62
Getting Started
Hard Drive Recovery Utilities
Recovering the original factory image
(recommended)
1
Press 1 on the keyboard to recover your hard disk drive to
its original factory setting. A confirmation message
displays reminding you that all data will be lost during
the recovery process. Be sure you have saved your work
before proceeding.
2
Click Yes to begin the recovery. Once complete, a
message displays that the HDD has been recovered.
3
Press any key on the keyboard to restart the computer.
Recovering the C: partition of the HDD without
changing the current partition size
To recover only your C: drive:
1
Press 2 on the keyboard when the TOSHIBA HDD
Recovery Utility screen displays. A confirmation
message appears, reminding you that all information on
the C: drive will be lost during the recovery process. Be
sure you have saved your work before proceeding.
2
Click Yes to begin the restoration. Once complete, a
message displays that the HDD has been recovered.
Recovering a hard disk drive to its factory default setting
deletes all partitions on the hard disk drive and your
information will be lost. Be sure to save your work first.
Recovering the C: drive to its factory default setting reformats
your drive and your information on the recovered drive will be
lost. Be sure to save your work first. If you have created other
partitions (for example, a D: drive) those partitions and any
information on them will not be affected and remain intact.
Advertisement
Table of Contents
