Table of Contents
Advertisement
Manual eject hole—Use if you need to release the disc tray
when the power is off. Use a straightened paper clip or other
narrow object to press the manual eject button located inside
the hole.
System Control Buttons
The System Control buttons (available on some models) on
the right side of the keyboard allow you to quickly launch
TOSHIBA Assist or display output on an external monitor (if
connected).
Sample System Control Buttons
Using the DVD-ROM or multi-function drive
Do not press the eject button or turn off the computer while the
Drive in-use indicator light is glowing. Doing so could
damage the disc or the drive.
When the disc tray is open, be careful not to touch the lens or
the area around it. Doing so could cause the drive to
malfunction.
Never use a pencil to press the manual eject button. Pencil
lead can break off inside the computer and damage it.
Power button
TOSHIBA Assist button*
Presentation button*
*Available on certain models.
Learning the Basics
101
Advertisement
Table of Contents
