Table of Contents
Advertisement
3.4 Marking
Upward direction when mounted onto rail
Read instructions before use
Runner production no.
EEC-notified body no.
AVANTI product name (Runner System 2000/2002 or Eagle
Standard no.
Runner 2000/2002
EN 353-1/A1:2017
Type: Rail Mount Size: AVANTI Fall Protection Rail Only. Read and follow all
instructions before use. Inspect device prior to each use.
0200
www.avanti-online.com
Serial No.:
Eagle DS
EN 353-1/A1:2017
Type: Rail Mount Size: AVANTI Fall Protection Rail Only. Read and follow all
instructions before use. Inspect device prior to each use.
www.avanti-online.com
0200
Serial No.:
Runner rating plate
EEC-notified body no.
Standard no.
Production batch no.
Read instructions before use
System 2000/2002 EN 353-1/A1:2017 CSA Z259.2.1-98
Eagle DS EN 353-1/A1:2017 CSA Z259.2.4-15
Harness EN 361 ANSI Z359.11 CSA Z259.10
Read supplied instructions prior to use. Min.distance 6 m (19.7 feet) between users.
Maximum number of users: 3. Systems must be inspected by a certified AVANTI technician
annually under normal use or inmediately in the event of a shock load as a result of a fall.
Only AVANTI replacement parts may be used with the system.
www.avanti-online.com
P: (+34) 976149524
Serial No.:
Production date:
Safety rail rating plate
Max distance between runner and harness 0,3 m
Shock absorber expiration date
Batch no.
Standard EN no. for shock absorber
EEC-notified body no.
Avanti Shock Absorber CE
for Avanti Fall Arrest System
EN 353-1/A1:2017
Expire:
No:
Shock absorber label
)
DS
User weight:
UP
40 - 136 kg
UP
P: (+ 34 ) 976149524
Production date:
User weight:
UP
40 - 136 kg
P: (+34) 976149524
UP
Production date:
WARNING
0200
Using replacement parts,
components not approved by
AVANTI or modified runners with
the rail system could result in
serious injuries or death.
Use of Personal Protective
Equipment is mandatory
FOLLOW ALL INSTRUCTIONS
Date of commissioning:
0200
4 Installation
4.1 Installation requirements
A certified technician shall be in charge of the FPS installati-
STOP
on. The certified technician shall take full responsibility for the
installation and shall guarantee that it is done in accordance
to these instructions.
a)
The FPS shall only be installed with original system parts.
b) All FPS elements shall be checked on site, even if the ladders are
supplied with the rails already fitted.
c)
The vibrations and torsional stress are absorbed by the ladder
joints, not by the safety rail.
d) Ensure that the ladder intended for mounting the FPS complies
with the requirements of EN 131 and EN ISO 14122. The internal
rung width shall be minimum 340mm (all AVANTI ladders meet this
requirement).
e)
The ladders with rung geometries different to AVANTI's may call
for special rung fittings. Prior to installation, these ladders shall be
calculated, tested and approved by AVANTI.
f)
Before installing the rail system, ensure that all parts are present.
Refer to the parts list supplied with the FPS.
g)
The ladders shall be installed vertically with a maximum inclination
of -5º / +15º.
h)
The parts of the safety rail system to be installed are shown below.
Safety rail section (backside)
Rung fitting
9
Advertisement
Table of Contents
