General Operation; Switching On; Switching Off - JVC LT-55NQ7105AT User Manual

55" class

Hide thumbs

Table Of Contents

Table of Contents

How to access some important functions?

Media Buttons (Play/ Pause/ Stop etc.) : Press

and select the Smart Player app, click OK to enter. The play/pause/stop and similar functions are accessible

through the OK and Direction Arrowbuttons as required. For example, when playing files from a USB device,

OK is to play or pause, Left and Right arrows are for Fast Backward and Fast Forward, and Return is to Stop play.

Subtitle: Press OK button of remote control under TV source, then select Subtitle by pressing

press OK to enter.

Program guide: Press OK button of remote control under TV source, then select Program guide by pressing

and press OK to enter.

Record: Press OK button of remote control under TV source, then select Record by pressing

OK to enter.

Info: Press

button of remote control under TV source.

Switching on

Follow the instructions on this page on how to switch on your TV set and the remote

control before going on to following pages describing how to use the channel set-up

procedure.

1. Insert two batteries in the remote control.The remote control uses 2 x 'AAA' batteries (included).

Precautions on using batteries:

- Only use the battery types specified.

- Make sure you use the correct polarity.

- Do not mix new and used batteries.

- Do not use rechargeable batteries.

- Do not expose batteries to excessive heat such as sunshine, fire or the like,

throw them in a fire, recharge them or try to open them, as this could cause

them to leak or explode.

- Remove the batteries from the remote control if you are not using it for a long

period of time.

2. Connect the power cable FIRST to the television, THEN to a mains socket.

(Note: If the power cable is connected to the television, please only connect the

power cable to the mains socket.)

Your TV set should only be connected to an AC supply. It must not be connected

to a DC supply. If the plug is detached from the cable, do not, under any

circumstances, connect it to a mains socket, as there is a risk of electric shock.

3. Connect an outside aerial to the ANTENNA IN socket at the back of the TV set.

4. When powered on, the TV will be turned on directly or be in standby.

Note: For some models, swi

If the power indicator lights up, the TV set is in standby mode. Press the

button on the remote control or on the TV set to turn on the TV.

Switching off

To put the TV set into standby mode, press the

or on the TV, the TV set remains powered up, but with low energy consumption.

To switch off the TV set, unplug the mains socket from the mains outlet.

Note: For some models, press the power button to switch off the TV set .

Remote Control Functions