Toro Groundsmaster 4500-D Operator's Manual page 12

2. Remove the 2 rivets securing the hood-latch
bracket to the hood
hood-latch bracket from the hood.
Figure 3
1. Hood-latch bracket
3. While aligning the mounting holes, position the
CE lock bracket and the hood-latch bracket onto
the hood (Figure 4).
Note:
The lock bracket must be against the
hood. Do not remove the bolt and nut from the
lock-bracket arm.
Figure 4
1. CE lock bracket
4. Align the washers with the holes on the inside of
the hood.
5. Rivet the brackets and the washers to the hood
(Figure 4).
6. Hook the latch onto the hood-latch bracket
(Figure 5).
(Figure 3). Remove the
2. Rivets
2. Bolt and nut
1. Hood latch
7. Screw the bolt into the other arm of the
hood-latch bracket to lock the latch in position
g012628
(Figure 6). Tighten the bolt but do not tighten
the nut.
1. Bolt
2. Nut
g012629
12
Figure 5
Figure 6
3. Arm of hood-latch bracket
g012630
g012631