Directing The Display Output When You Turn On The Computer - Toshiba U500-ST5302 User Manual

Directing the display output when you turn on the computer

Once you have connected an external display device, you can
choose to use the internal display only, the external device only, or
both simultaneously.
NOTE
The quickest way to change the display output settings is to use the
display hot key (
1 Press
2 While holding down
you want takes effect. Briefly pause each time you press the
key to allow time for the display to change.
This hot key cycles through the settings in the following order:
(Sample Image) Display options window
3 Release the
Using external display devices
Some modes are only available with the appropriate device attached
and turned on.
+ ):
Fn F5
and simultaneously.
Fn F5
Built-in display only
Built-in display and external monitor simultaneously
External monitor only
TV (or other external video device) only
Built-in display and TV (or other external video device)
simultaneously
Built-in display and external monitor (extended desktop)
Built-in display and TV (extended desktop)
Swap—Switch primary display between internal display
and external monitor when using extended desktop
key.
Fn
Getting Started
Fn , press F5 repeatedly until the setting
79
F5