Toshiba U300-ST3091 User Manual page 48

48
Getting Started
Adding memory (optional)
The computer has two memory slots—Slot A and Slot B. You can
install one or two memory modules.
NOTE
If the computer is on, begin at step 1; otherwise, skip to step 3.
1 Click Start, and then click the arrow next to the lock button in
the lower-right corner of the Start menu.
The Shut Down menu appears.
Start
(Sample Image) Shut Down menu
2 Click Shut Down.
The operating system turns off the computer.
3 Unplug and remove any cables connected to the computer,
including the AC adaptor.
4 Remove the main battery. For information on removing the
main battery, see
on page
Before you install or remove a memory module, turn off the computer
using the Start menu. If you install or remove a memory module
while the computer is in Sleep or Hibernation mode, data will be lost.
For this model, Slot A is the bottom slot. Slot B is the top slot. If only
one memory module is to be installed, it must be installed in slot A.
"Removing the battery from the computer"
101.
Arrow
Shut Down Menu