Table of Contents
Advertisement
66
Getting Started
Using the Dual Mode Pad
5
Select Dual Mode.
6
Select Switch to Button Mode by tapping in the upper-
right corner.
NOTE
Configuring virtual buttons
The virtual buttons at the top of the Dual Mode Pad are pre-
configured for the Email, ConfigFree, and Print functions.
You can assign different functions to these buttons if you
wish.
The virtual buttons on the bottom of the Dual Mode Pad
(buttons 4, 5, and 6 in the Properties for Synaptics LuxPad
window) are unassigned by default. In order to use one of
these buttons, you must first configure that button so that it is
associated with a function.
To configure a virtual button:
1
Perform steps 1-5 in
2
Select the virtual button you wish to configure.
3
Select the desired options, and then click OK.
4
Click OK.
5
Click OK to close the Mouse Properties window.
To force the Dual Mode Pad to use Button Mode only whenever an
external pointing device such as a mouse is plugged in, select Always
in Button Mode when an external device is plugged in.
"Enabling Dual Mode" on page
65.
Advertisement
Table of Contents
