Table of Contents
Advertisement
56
Installing additional memory (optional)
6
Remove the memory module from its antistatic
packaging.
7
Holding the memory module by its edges so that the gold
connector bar faces the slot, fit the module into the
socket.
8
Gently put the memory module connector down at an
angle and press down until the clips snap into place.
Do not force the module into position. The memory
module should be level when secured in place.
Inserting the memory module
Static electricity can damage the memory module. Before you
handle the module, touch a grounded metal surface to
discharge any static electricity you may have built up.
To avoid damaging the memory module, be careful not to
touch its gold connector bar (on the side you insert into the
computer).
Avoid touching the connectors on the memory module or on
the computer. Grease or dust on the connectors may cause
memory access problems.
Advertisement
Table of Contents
