Advertisement
Using your appliance
Mixing/kneading/beating/emulsifying/whisking (See figure A & B)
1.
Press button (2) to release the multi functional head (9) and raise it to a vertical
position.
2.
Fit the bowl (6) onto the appliance by turning until it locks into position and
place the ingredients in it.
3.
Position the cover on the head with the filling opening at the front of the
appliance (see figure B).
4.
Fit the desired accessory (10,11,12) in the power output, pushing the shaft of the
accessory home and turn it a quarter turn towards you to lock it in position (see
figure B).
5.
Lower the multi functional head of the appliance to the horizontal position and
press button again (a click should be heard).
6.
During preparation, you can add ingredients through the opening on the cover.
7.
To stop the appliance, turn the knob (1) back to 0.
A
A
1.
Assemble the blade assembly to the seal and lock it with a quarter turn
clockwise into the bottom of the jug (the jug must be upright).
2.
Lower the multi functional head of the appliance (9) to a horizontal position and
press button (2) again (a click should be heard).
3.
Press the removable cover (3) and switch it off to open the cover (3).
4.
Ensure that the appliance is at a standstill before latching on the assembled
blender.
5.
Fit the assembled blender and lock it in position by turning it clockwise.
B
B
C
C
6
Advertisement
