Removing A Memory Module - Toshiba L500-ST2521 User Manual

58
Getting Started
Adding memory (optional)
14 Replace the memory module slot cover and secure it using the
screw.
15 Re-insert the main battery. For more information on inserting
the main battery, see
16 Turn the computer right side up.
17 Reconnect the cables.
18 Restart the computer.
You can now continue setting up the computer. When the operating
system has loaded, you can verify that the computer has recognized
the additional memory module.
If you are adding extra memory after setting up the computer, verify
that the computer has recognized it correctly as described in
"Checking total memory" on page

Removing a memory module

If you need to remove a memory module:
1 Complete steps
page 53
module slot cover.
TECHNICAL NOTE: You must have at least one memory module
installed for the computer to work.
1–8
to shut down the computer and open the memory
Do not try to remove a memory module with the computer turned on.
You can damage the computer and the memory module.
Do not remove the memory module while the computer is in Sleep or
Hibernation mode. The computer could hang up the next time you
turn it on and data in memory will be lost. In either of the above
cases, the Sleep configuration will not be saved.
"Inserting a charged battery" on page
60.
in "Installing a memory module" on
121.