Toshiba L15-S1041 User Manual page 172

172
If Something Goes Wrong
Resolving a hardware conflict
Examine the disc to see whether it is dirty. If necessary, wipe
it with a clean damp cloth dipped in water or a neutral
cleaner.
Replace the disc in the tray. Make sure it is lying flat, label
side uppermost. Press the disc down until it locks on the
spindle. Close the drive tray carefully, making sure it has shut
completely.
If you are trying to play a DVD movie, it may not play
because the DVD region does not match the DVD player
region. For more information, see
function drive components" on page
You press the disc eject button, but the drive tray does
not slide out.
Make sure the computer is connected to a power source and
turned on. The DVD-ROM or multi-function drive eject
mechanism requires power to operate.
Make sure a program is not accessing the drive and
preventing it from being ejected.
To remove a disc without turning on the computer, use a
narrow object, such as a straightened paper clip, to press the
manual eject button. This button is in the small hole next to
the disc eject button on the right side of the computer.
Some discs run correctly, but others do not.
If the problem is with an application CD-ROM, refer to the
software's documentation and check that the hardware
configuration meets the program's needs.
Never use a pencil to press the manual eject button. Pencil
lead can break off inside the computer and damage it.
"DVD-ROM or multi-
89.