Page 1
STROBE FADE SMOOTH Bedienungsanleitung User Manual LED IP Spot-15W RGBW Outdoor Spot with Stake Wetterfester LED-Spot (IP65) mit 15-W-LED, inkl. IR-Fernbedienung & Erdspieß Weather-proof LED spot (IP65) with 15 W LED, incl. IR remote control & stake REMOTE 15° IP65...
Diese Bedienungsanleitung gilt für die Artikelnummer / This user manual is valid for the article number: 50498636 Das neueste Update dieser Bedienungsanleitung finden Sie im Internet unter: You can find the latest update of this user manual in the Internet under: www.eurolite.de 3/20 00126917, Version 1.0...
SICHERHEITSHINWEISE WARNUNG! Lesen Sie aufmerksam die Sicherheitshinweise und benutzen Sie das Produkt nur wie in dieser Anleitung beschrieben, damit es nicht versehentlich zu Verletzungen oder Schäden kommt. Verwendungszweck • Das Produkt dient zur Beleuchtung im Innen- und Außenbereich und ist nach IP65 aufgebaut. Es darf im Betrieb im Innen- und Außenbereich montiert und betrieben werden und ist nicht dimmbar.
Page 6
Warnung vor Verbrennung und Brand • Der zulässige Umgebungstemperaturbereich (Ta) beträgt -5 bis +45 °C. Verwenden Sie das Gerät niemals außerhalb dieses Temperaturbereichs. • Die Gehäusetemperatur (Tc) kann im Betrieb bis zu 65 °C betragen. Vermeiden Sie den Kontakt mit Personen oder Gegenständen.
INBETRIEBNAHME Befestigungsmöglichkeiten Für eine Montage am Boden schrauben Sie zunächst den Erdspieß mittels der mitgelieferten Schrauben an den Bügel des Geräts. Nun kann der Spot einfach in die Erde gesteckt und nach Wunsch ausgerichtet werden. Zum Ausrichten des Geräts lösen Sie die Feststellschrauben am Hängebügel, stellen die gewünschte Neigung ein und ziehen die Schrauben wieder fest an.
BEDIENUNG Nach dem Anschluss ans Netz ist das Gerät betriebsbereit. Die Bedienung des Spots erfolgt über die IR-13- Fernbedienung. Halten Sie die Fernbedienung beim Betätigen einer Taste immer in Richtung des Sensors am Gerät. Zwischen Fernbedienung und Sensor muss Sichtverbindung bestehen. Helligkeit/ Geschwindigkeit Pulseffekt...
REINIGUNG UND WARTUNG Das Gerät sollte äußerlich in regelmäßigen Abständen von Verunreinigungen wie Staub usw. gereinigt werden. Insbesondere die Linse sollte sauber sein, damit das Licht mit maximaler Helligkeit abgestrahlt werden kann. Trennen Sie das Gerät vom Netz und lassen Sie es abkühlen, bevor Sie mit der Reinigung beginnen. Reinigen Sie die Oberflächen mit einem fusselfreien, angefeuchteten Tuch.
• With one high-power 15 W RGBW LED (4in1) • Weather-proof aluminum die-cast housing (IP65) • Convenient wireless control via included IR remote control EUROLITE IR-13 • Direct color selection for 16 preset colors • Built-in show programs with variable speed (color switch, color fade, strobe and pulse effect) •...
SAFETY INSTRUCTIONS WARNING! Please read the safety warnings carefully and only use the product as described in this manual to avoid accidental injury or damage. Intended use • This product is designed to light indoor and outdoor areas and is IP65 rated. It can be mounted and operated in indoor and outdoor areas and is not dimmable.
Page 14
Warning – risk of burns and fire • The admissible ambient temperature range (Ta) is -5 to +45°C. Do not operate the device outside of this temperature range. • The housing temperature (Tc) can be up to 65°C during use. Avoid contact by persons and materials. •...
DESCRIPTION OF THE DEVICE 1) RGBW LED 2) IR sensor for the remote control 3) Mounting bracket 4) Fixation screws 5) Power cord 6) Pressure compensation element 15/20 00126917, Version 1.0...
GETTING STARTED Placing the unit To place the device on the floor, first attach the ground stake to the mounting bracket using the supplied screws. Now the spot can be stuck into the ground and aligned as desired. To align the device, loosen the fixation screws, adjust the inclination angle and retighten the screws.
OPERATION After connecting the unit to the mains it is ready for operation. The spot is to be controlled via IR-13 remote control. When actuating a button, always point the remote control in the direction of the sensor at the control unit’s front or rear.
CLEANING AND MAINTENANCE The outside of the device should be cleaned periodically to remove contaminants such as dust etc. The lense, in particular, should be clean to ensure that light will be emitted at maximum brightness. Disconnect the device from power and allow it to cool before cleaning. Clean the surface with a soft lint-free and moistened cloth.
TECHNICAL SPECIFICATIONS Power supply: 100-240 V AC, 50/60 Hz Power consumption: 18 W IP classification: IP65 Power connection: Fixed power supply cord with safety plug LED: 1 x high-power 15 W 4in1 QCL RGBW Beam angle: 15° Cooling fan: No, cooling by convection Control: IR remote control (provided) Housing color:...
Page 20
Eurolite is a brand of Steinigke Showtechnic GmbH Andreas-Bauer-Str. 5 97297 Waldbüttelbrunn Germany D00126917 Version 1.0 Publ. 01/04/2020...
Need help?
Do you have a question about the LED IP SPOT and is the answer not in the manual?
Questions and answers