Removing A Disc With The Computer On; Removing A Disc With The Computer Off - Toshiba A85-S1071 User Manual

Removing a disc with the computer on

To remove a compact disc (CD or DVD) with the computer
turned on:
1 Press the eject button on the drive.
2 Pull the tray until it is fully open, remove the disc, and
place it in its protective cover.
3 Gently push the tray in to close it.

Removing a disc with the computer off

1 Insert a slender object, such as a straightened paper clip,
into the manual eject hole.
The disc tray slides partially out of the drive (about 1
inch).
2 Gently pull the tray out until it is fully open, remove the
disc, and place it in its protective cover.
3 Gently push the tray in to close it.
Using the DVD-ROM or multi-function drive
Do not press the eject button while the in-use indicator light is
glowing. Doing so could damage the disc or the drive.
Also, if the disc is still spinning when you open the disc tray,
wait for it to stop spinning before you remove it.
Never use a pencil to press the manual eject button. Pencil
lead can break off inside the computer and damage it.
Learning the Basics
95