Table of Contents
Advertisement
Installing a memory module
Additional memory modules can be installed in the memory
module slots on the base of the computer. You will need a
standard Phillips No. 1 screwdriver for this procedure.
NOTE
The computer has two memory module slots — Slot A and
Slot B. You can install one or two memory modules.
If the computer is on, begin at step 1; otherwise, skip to step
3.
1
If the computer is on, click Start, Turn off computer.
The Turn off computer window appears.
Before adding external devices or memory, Toshiba
recommends setting up your software. See
software" on page
To avoid damaging the computer's screws, use a standard
Phillips No. 1 screwdriver that is in good condition.
Installing a memory module with the computer's power on may
damage the computer, the module, or both.
Before you install or remove a memory module, turn off the
computer using the Start menu. If you install or remove a
memory module while the computer is in Standby or
Hibernation mode, data will be lost.
Getting Started
Adding memory
45.
55
"Setting up your
Advertisement
Table of Contents
