Advertisement
From step 6 another view of
how it will look when it is in-
stalled.
If required you can spray a silicon spray or
WD-40 into the hole to help your table move
smoothly up and down. This is only required
if over time the table begins to make noises
as it moves up and down.
Metric Allen Wrench Set will be
needed to assemble the table
Tasmanian Height Adjustable Table Assembly
1. This table offers 2 positions on its sewing surface. To
move the platform down into the sewing well, press firmly
down on the handle release. Press gently down on the wood
platform as it sinks into place.
2. To move the platform back up to the flush position, pull
the handle all the way forward listening for the handle to hit
the wood top surface.
3. Never move the platform with your sewing machine on
the platform. Always remove the machine as you move
the platform up and down.
To adjust the height of the platform in the second position
creating a flush surface:
1. Move the platform down into the sewing well as demon-
strated in step 1 above.
2. Place your machine in the well. If your machine's sew-
ing surface (the area on your machine where your machine's
foot rests) is sitting below the edge of the table you will need
to raise the platform. If your sewing surface is sitting above
the edge of the table you will need to lower the platform.
a. To lower platform: Remove your machine from the
platform and pull the handle forward to lock the platform in
the top position.
b. Begin to tighten the bolt on the Eye-Hook located at the
end of the chain under the top surface, until you achieve the
proper height for your sewing machine. You may need to
adjust this position several times before finding the correct
position for your bolt.
c. To raise platform: Perform the same steps as above in a
& b, but instead of tightening the bolt loosen the bolt
If after completing the above steps your sewing machine's
sewing surface is still not flush you may need to shorten the
chain by moving the screw.
How to use the Mechanism in your new table:
200712
Advertisement
