Advertisement
(Close up support frame and top panel assembly)
5. Slide leg into the support frame bracket
Slide hexagonal rod into hexagonal insert on leg
Locate 4 holes on leg flange with support bracket
(see close up below) leg with 2 silver rods at end is closets to lift
Another view of the leg and support frame assembly
Tasmanian Height Adjustable Table Assembly
6.To install the cross bar you must remove the 2 bolts that
are already in the leg at the top. You have been supplied
with 2 longer bolts to allow you to install the cross bar
onto the leg.
7. Add washer & screw castor into leg and tighten using spanner.
8. Place handle onto rod
Line up grub screw with slot on rod and tighten
9. Height of platform is adjusted using wing nut or moving screw
10. We suggest applying silicon spray or WD40 into hole to lubricate
winding mechanism for a smooth action.
200712
Advertisement
