Setting Up The Fax Function - Toshiba 5105-S501 User Manual

80
Getting Started

Setting up the fax function

HINT: If you are using more than one printer, make sure the name
you give the printer is descriptive enough to help you tell the
difference.
Setting up the fax function
Your system's auto-receive fax function is enabled by default.
To change the function is a two-stage process.
To set up the fax function:
1 Click Start, Control Panel, Printers and Other
Hardware.
The Printers and Other Hardware window appears.
2 Click Printers and Faxes.
3 Double-click the fax icon.
4 Follow the on-screen instructions.
To disable the fax auto-receive function:
1 Click Start, Printers and Faxes.
2 Right-click the fax icon.
3 Click Properties from the drop-down menu.
4 Click the DEVICES tab.
5 Under the device name, right-click Toshiba Soft Modem
AMR, highlight Receive and click the Disable option.
To enable the auto-receive function, repeat steps 1-4. But
under the device name, right-click Toshiba Soft Modem
AMR, highlight Receive and click the Enable device to
receive and Auto options.